Battery Capacity
2010.6kWh
3360Ah / 598.4V LiFePO4 battery bank using CTP (Cell to Pack) technology.
Rated Power
1MW
Peak power 1.1MW. AC output 400V (−20% ~ +15%).
Container Form Factor
40ft
12192 × 2438 × 2896 mm, 25800 kg.
Cycle Life
6000+ cycles
Over 6000 cycles while maintaining 70% SOH — more than 15 years with daily charging.
Overview
The 2MWh containerized energy storage system is a highly integrated, intelligent modular solution for commercial and industrial energy storage. It uses CTP (Cell to Pack) technology with a multi-level battery protection system and an HFC-227ea fire suppression system, and supports parallel connection for easy system expansion. Cooling can be specified as liquid cooling or air cooling.
Battery packs, PCS, BMS, EMS, fire suppression and thermal management all sit inside one 40ft container — easy for transportation, installation and maintenance.
Standard shipping container footprint
Layered battery protection system plus an integrated HFC-227ea fire suppression system, with real-time status monitoring and fault recording.
Full protection chain from cell to system level
Intelligent modular architecture that reduces parts and connections while making maintenance and replacement simpler.
Supports parallel connection for system expansion
Cooling can be specified to suit the site: liquid cooling for uniform temperature control, or air cooling for simpler maintenance.
Choose to match climate and project requirements
Over 6,000 cycles while maintaining 70% SOH, and durable for more than 15 years with daily charging.
Lower lifetime cost per delivered kWh
Real-time status monitoring and historical fault records over 4G, with RS485 / CAN on the local bus.
Suitable for renewable-energy grid connection
System Topology
The container sits at the center of your site’s power system: solar, grid and diesel generation feed it, and it serves your loads while reporting everything to the cloud.
Ground-mount or rooftop PV feeds the container. Excess solar generation is stored instead of curtailed, and released when it is worth more.
The utility grid charges the battery bank through the electricity meter at off-peak tariff. AC output 400V (−20% ~ +15%), 1444A rated current.
Existing diesel gensets keep running as backup — the BESS cuts their running hours and fuel burn, and covers loads while generators start.
Factory and mall loads are served around the clock, while the EMS reports operating data to the cloud platform over 4G for remote monitoring.
The whole flow is automatic: the energy management system decides when to charge, when to discharge and when to hold reserve capacity, so your facility always runs on the cheapest available power.
What’s Inside
A 40ft container integrating the complete storage and conversion chain with CTP battery architecture and an integrated fire suppression system.
3360Ah / 598.4V battery bank rated 2010.6kWh, built with Cell to Pack technology.
Layered battery protection system with real-time monitoring and fault recording.
Rated 1MW (peak 1.1MW), 1444A rated / 1588A maximum AC current, supporting parallel connection.
Schedules charge and discharge and reports to the cloud platform for remote control.
Integrated clean-agent fire suppression system inside the container.
Liquid cooling or air cooling, selected to match the site climate and project requirement.
Specifications
Complete technical parameters for the 1MW / 2010.6kWh container. Need a stamped datasheet for tender submission? Request it via the form at the bottom of this page.
| Item | H098-2MWh |
|---|---|
| System | |
| Product Model | H098-2MWh |
| Battery Capacity | 3360Ah / 598.4V (2010.6kWh) |
| Rated Power | 1 MW |
| Peak Power | 1.1 MW |
| Battery Type | LiFePO4 (Lithium Iron Phosphate) |
| Battery Cycle Life | Over 6000 cycles |
| Electrical | |
| Battery Voltage Range | 467.5–682.5 V |
| AC Output Voltage | 400V (−20% ~ +15%) |
| AC Rated Current | 1444A |
| Max AC Output Current | 1588A |
| Communication Protocol | RS485 / CAN |
| Wireless Communication | 4G communication supported |
| Mechanical & Environment | |
| Dimensions (L×W×H) | 12192×2438×2896 mm (40ft container) |
| Weight | 25800 kg |
| Discharge Temperature | −20 °C ~ 50 °C |
| Charging Temperature Range | −5 °C ~ 50 °C |
| Storage Temperature | Recommended 0 °C ~ 45 °C |
| Protection & Certification | |
| System Protection | Over-temperature, over-voltage, over-current, over-charge, over-discharge, load short-circuit and overload protection |
| Fire Suppression | HFC-227ea clean-agent system |
| Certification Standards | IEC, UN38.3, MSDS, RoHS |
Specifications are subject to the documents shipped with each unit. Certifications can be provided on request to meet specific regional grid and project requirements.
Applications
Utility-scale adjacent storage for industrial users and renewable plants that need megawatt-hour capacity in a standard container footprint.
Smooth renewable output and shift generation to peak-price hours.
Cut demand charges and relieve transformer capacity pressure.
Pair with PV or wind generation to firm the output and raise self-consumption.
High-power charging buffering without oversized grid connections.
Reliable power for sites with weak or intermittent grid supply.
Centralized storage across multiple buildings and tenants.
Packing & Delivery
The container leaves the factory fully pre-tested. On site it needs a prepared foundation, cable connection and grid tie — our team supports acceptance.
Capacity, grid connection and site conditions confirmed against your load profile and local tariff structure.
Scheduled per project
Built to the confirmed configuration, with cell and module batch records kept on file.
Scheduled per project
Every unit completes full-function FAT testing before shipment, with multiple QA re-tests.
Completed pre-shipment
Reinforced packing plus standard hoisting points, suited to sea and land transport.
Standard export packing
Shipping documents and parameter sheets travel with the unit; we support customs clearance and site acceptance.
Per shipping schedule
On-site wiring and grid connection, then onboarding to the cloud platform for remote monitoring.
Depends on site conditions
FAQ
The questions we are asked most often about this containerized energy storage system.
Get a Quote
Share your site type, location and approximate load, and we will come back with a capacity recommendation and a quotation.
Who We Are
Huada New Energy (Huizhou Huada Technology Co., Ltd.) is a professional energy storage manufacturer with a complete product portfolio — portable power stations, household energy storage systems and commercial & industrial (C&I) solutions. Starting from lead-acid battery production, we have grown into an advanced lithium technology manufacturer.
We are backed by multiple invention patents, utility model patents, design patents and High-Tech Enterprise certification. With a professional R&D team, modern production facilities and a global energy monitoring data center, we provide reliable OEM/ODM services for customers worldwide.
Advanced lithium battery manufacturer, upgraded from lead-acid production.
Reliable OEM/ODM services for customers worldwide.
Global energy monitoring data center for after-sales support.
High-Tech Enterprise certification with a full patent portfolio.
