The H096-10kWh Pro is a 10kWh all-in-one home battery with a built-in inverter — a compact, integrated energy storage solution for households that want reliable solar backup without complex installation.
Key Features:
– 10240Wh capacity with 51.2V LiFePO4 cells, 6,000+ cycle life
– Integrated design with built-in inverter — no extra inverter matching needed
– Floor-standing unit with casters for flexible placement
– Max. charging current 80A for fast charging
– WiFi direct connection and mobile APP monitoring
– Smart BMS protection: over-voltage, over-current, over-temperature, AC/DC and short-circuit protection
– OEM/ODM and wholesale orders welcome
Usable Capacity
10.24kWh
200Ah / 51.2V LiFePO4 pack with the inverter built into the same cabinet.
Max Charge / Discharge
80A
Fast solar charging with 110% overload capability for start-up surges.
Installation
Floor-standing
603 × 300 × 1620 mm, 180 kg, on casters — no wall drilling required.
Cycle Life
3000+ cycles
LiFePO4 cells keep more than 80% of the original capacity after 3000 cycles.
Overview
The H096-10kWh Pro is an all-in-one home energy storage unit built around 51.2V LiFePO4 cells. It stores surplus solar power during the day and supplies your home at night or during a grid outage. Because the inverter is built into the same cabinet, there is no inverter matching to calculate and no complex wiring between components — a single floor-standing unit covers the daily storage needs of an average household and moves into place on casters.
No separate inverter to source, size or match — lower equipment cost and less labour.
Only standard L+N+PE wiring needed
Lithium iron phosphate chemistry chosen for thermal stability and long service life.
Over 3000 cycles with 80%+ retained
Direct WiFi and Bluetooth connection to the mobile APP for status anywhere.
No gateway hardware required
The 180 kg unit rolls into place, keeping handling equipment simple.
No wall drilling required
Protection against over-voltage, over-current, temperature extremes and short circuits.
Real-time cell monitoring
Installers can tie the unit into existing solar and energy management equipment.
Works with PV, grid and genset inputs
System Topology
The battery sits between rooftop solar, the utility grid and your household loads. Solar charges it first, the grid fills the gap at cheap tariff hours, and it takes over essential loads when the grid drops.
Surplus daytime generation is stored instead of being exported cheaply, then used after sunset.
Grid connection type L+N+PE with 110% overload capability for motor start-up.
The hybrid inverter and the 10.24kWh pack share one cabinet.
Lighting, refrigeration, networking and air conditioning continue through an outage.
WiFi and Bluetooth for live status, RS485 / CAN for local systems.
What’s Inside
Every unit is assembled, inspected and put through full-function testing before it leaves the factory, so the installers only need to place it, wire it and switch it on.
A 200Ah / 51.2V configuration rated 10240Wh, working across a 40V–58.4V window.
Cell balancing with over-charge, over-discharge, over-current and temperature protection.
AC/DC conversion, grid-tie logic and backup changeover in the same enclosure.
State of charge, voltage and alarms readable on the unit.
The 180 kg cabinet rolls into a garage, plant room or utility room.
RS485 / CAN for wired integration plus WiFi and Bluetooth for the APP.
Specifications
Complete parameters for the all-in-one unit. Prefer a stackable tower instead? The H096 platform also scales from one to four modules. Request a stamped datasheet through the form at the bottom of this page.
| Item | H096-10kWh Pro |
|---|---|
| System | |
| Model | H096-10kWh Pro |
| Battery Capacity | 200Ah / 51.2V (10240Wh) |
| Battery Type | LiFePO4 |
| Installation Mode | Floor-standing, on casters |
| Battery Cycle Life | Over 3000 cycles, remaining capacity above 80% |
| Electrical | |
| Nominal Voltage | 51.2V |
| Battery Voltage Range | 40V – 58.4V |
| Max Charge / Discharge Current | 80A |
| Overload Capacity | 110% |
| Grid Connection Type | L+N+PE |
| Communication | RS485 / CAN |
| Communication Mode | WiFi and Bluetooth connection with mobile APP |
| Mechanical & Environment | |
| Dimensions (W×D×H) | 603 × 300 × 1620 mm |
| Weight | 180 kg |
| Charging Temperature | 0 °C ~ 50 °C |
| Discharge Temperature | −20 °C ~ 50 °C |
| Protection & Certification | |
| System protection | Over-temperature protection, over-voltage protection, over-current protection, over-charge protection, over-discharge protection and load short-circuit protection |
| Certification standards | CE / FCC / RoHS |
| Protection Level | IP20 |
Specifications follow the documents shipped with each unit. Capacity, branding, enclosure and communication protocol can be customized for OEM / ODM programmes.
Applications
Households that want one integrated unit instead of a battery plus inverter combination, covering solar self-consumption, tariff savings and backup in a single commissioning visit.
Evening load covered by stored solar instead of peak-tariff purchases.
Lighting, refrigeration, networking and medical equipment keep running.
One unit right-sizes properties too large for a single wall battery.
Practical storage core where the grid supply is unreliable.
Charge cheap, discharge expensive, scheduled automatically.
No inverter matching means faster quoting, installation and commissioning.
Packing & Delivery
Every unit completes full-function testing before packing, ships in reinforced export packaging and arrives ready to wire up.
10.24kWh confirmed against your daily consumption and essential-load list.
Before order
Built to the confirmed configuration, with cell batch records kept on file.
Per order schedule
Capacity, protection and inverter functions tested before shipment.
Completed pre-shipment
Protective packing and export carton suitable for sea and land transport.
Standard export packing
Packing list, parameter sheet and wiring guidance travel with the unit.
Per shipping schedule
Standard L+N+PE wiring by a qualified installer, then pair the mobile APP.
Depends on site conditions
FAQ
The questions homeowners, installers and distributors ask us most often about this battery.
Get a Quote
Share your monthly consumption, essential loads and whether you already have rooftop solar — we will come back with a capacity recommendation and a quotation.
Who We Are
Huada New Energy (Huizhou Huada Technology Co., Ltd.) is a professional energy storage manufacturer with a complete product portfolio — portable power stations, household energy storage systems and commercial & industrial (C&I) solutions. Starting from lead-acid battery production, we have grown into an advanced lithium technology manufacturer.
We are backed by multiple invention patents, utility model patents, design patents and High-Tech Enterprise certification. With a professional R&D team, modern production facilities and a global energy monitoring data center, we provide reliable OEM/ODM services for customers worldwide.
Advanced lithium battery manufacturer, upgraded from lead-acid production.
Reliable OEM/ODM services for customers worldwide.
Global energy monitoring data center for after-sales support.
High-Tech Enterprise certification with a full patent portfolio.
