A fire-resistant coating for energy storage is a passive-protection layer applied to a battery cabinet or enclosure that slows heat transfer and helps keep a cell failure from becoming a system fire. huadaenergy is a pioneer in applying a newly developed fire-resistant coating to energy storage systems: the two-component intumescent coating was jointly developed with affiliated material-science companies, and huadaenergy brought it into storage cabinets first. This article explains what the coating is, why it matters as battery codes tighten, its documented advantages, the fields it serves, and what buyers should verify. Test figures are quoted from third-party reports and are limited to the samples tested.

What Is a Fire-Resistant Coating for Energy Storage?
A fire-resistant coating for energy storage is a passive material that insulates an enclosure from an external flame and delays the temperature rise on the protected surface, buying time for detection and shutdown. Unlike a suppression system that reacts after ignition, the coating works without power or moving parts.
How the intumescent layer works
The MARC coating is a two-component intumescent system. Under high heat the formulation swells into a porous char layer; the development team describes composite intumescent char-layer control and ceramic-phase high-temperature reinforcement as its core technologies. That expanded layer is what separates the steel surface from the flame, rather than simply resisting the fire chemically.
Why passive protection sits beside cell certification
Cell and pack tests describe the battery; a coating describes the installed enclosure. As codes such as the 2026 edition of NFPA 855 move toward system-level fire testing, passive layers are one of the tools designers use to manage propagation between units. They complement, and do not replace, the electrical and thermal protections built into the battery.
Who Developed the Coating and What Is huadaenergy’s Role?
The coating was jointly developed inside a group of affiliated companies, and huadaenergy is the first to apply the new material in the energy storage industry. Hunan Yingsuo Technology is described in its own brochure as the core operating company of TopMaterial Tech’s “AI + New Materials” business, drawing on research from the State Key Laboratory of Powder Metallurgy at Central South University. Changsha Dingcai Technology is the other named developer in the test documents, and Mr. Cai Zhihua — also behind huadaenergy — is a shareholder in the venture.
From materials research to an installed product
Yingsuo’s brochure describes AI-driven formulation optimisation, a pilot production line for fire-resistant and thermal-insulation coatings, and a goal of raising the maximum service temperature beyond conventional products. huadaenergy’s contribution is the application step: specifying the coating for storage equipment and bringing a coated cabinet concept to buyers. It is an application pioneer, not a claim to own the underlying material patents.
What Advantages Does the Coating Offer?
The coating’s advantages are high-temperature resistance, an expanding insulating char, strong substrate adhesion and compliance-friendly chemistry — each supported by a specific test document rather than a marketing claim.
| الميزة | What the source says | Buyer relevance |
|---|---|---|
| Ultra-high-temperature fire resistance | Brochure describes a two-component intumescent coating for harsh environments with ultra-high-temperature resistance | Targets the temperatures reached in a battery or industrial fire, not only ambient heat |
| Composite intumescent char control | Named as a core technology in the Yingsuo brochure | An expanding char layer insulates the substrate instead of only forming a surface film |
| Ceramic-phase high-temperature reinforcement | Named as a core technology in the same brochure | Helps the protective layer stay effective at high temperature |
| AI-driven formulation and pilot production | Brochure cites AI-based R&D and a next-generation pilot line | Supports consistency and customisation for different scenarios |
| Measured fire and adhesion performance | Reports YJ2025060240 and EMT02R000171C01, detailed below | Gives a documented protocol to review, within the stated sample limits |
| RoHS-compatible, non-dangerous-goods transport | RoHS report A2260349272101001C and SDS XG26165519 | Simplifies material compliance and logistics documentation |
Thermal protection under a direct flame
In the fire-resistance test discussed below, a 2.5 mm coated steel plate exposed to an 800–850 °C Bunsen flame for 30 minutes did not burn through, and its peak back-face temperature was 154.8 °C against a 300 °C client criterion. That is evidence for the tested plate under that protocol — not a rating for every enclosure.
Adhesion and chemical compliance
A separate cross-cut test reported adhesion grade 0 against a criterion of grade 1 or better. A RoHS report concluded the sample conformed to EU RoHS 2011/65/EU and (EU) 2015/863, with lead measured at 256 mg/kg against a 1000 mg/kg limit. Both results are sample-specific.
Where Is the Coating Applied?
The coating is specified for energy storage cabinets, containerised storage, high-temperature industrial equipment, building steel structures and new-energy vehicle battery enclosures. The source brochure names all four field groups, with storage as the first application huadaenergy pursued.
| Field | Use described in the source brochure |
|---|---|
| تخزين الطاقة | Protects storage cabinets and power-storage equipment, helping prevent fire incidents |
| Industrial containerised storage | 500 kWh–3 MWh systems shown in the brochure’s industry applications |
| High-temperature industrial equipment | Boilers, heating furnaces and similar equipment |
| Building steel structures | Fire protection of steel in high-rise commercial buildings |
| New-energy electric vehicles | Battery-pack enclosures, to reduce thermal-runaway risk; also vehicle body components |
| Electric transport | High-speed trains and other electric transport fire protection |
| Magnesium-alloy auto parts | A fire- and corrosion-resistant variant is listed for these components |
What Do the Test Documents Report?
Four third-party documents describe the coating’s fire, adhesion, chemical and safety properties, and each limits its result to the sample tested. They are useful evidence of a defined protocol, not a system certificate for a battery tower.
| الوثيقة | النطاق | Reported result |
|---|---|---|
| Fire resistance YJ2025060240 — Zhejiang Huace Yuanjian Testing (CTI-FST), 1 Jul 2025 | 2.5 mm coated steel plate, Bunsen flame 800–850 °C, 30 min | No burn-through; back-face under 300 °C throughout, peak 154.8 °C; conclusion “conforms” |
| Adhesion EMT02R000171C01 — CTI Shandong, 3 Jul 2025 | Cross-cut referenced to GB/T 31586-2015, criterion grade ≤1 | Adhesion grade 0, reported as conforming |
| RoHS A2260349272101001C — CTI, 11 May 2026 | EU RoHS 2011/65/EU and (EU) 2015/863; Pb, Cd, Hg, Cr(VI), PBBs, PBDEs, phthalates | Conforming; lead 256 mg/kg vs 1000 mg/kg limit, others not detected |
| SDS XG26165519 — CTI, 12 May 2026 | Safety data sheet to EU REACH 2020/878; product named Multi-Action Refractory Coating (MARC) | CLP classifications listed (e.g. skin and eye irritation); not regulated as dangerous goods under IMDG, IATA or ADR |
The reports state that samples and their information came from the applicant, that results apply only to the samples tested, and that they are for internal reference and research. The reports are issued to Changsha Dingcai Technology or Hunan Yingsuo — the developer group — and are not certificates held by huadaenergy. Read them as documentation of how a coating was tested, and ask for system-level evidence separately.
How Does the Coating Fit a Battery Product?
The coating is a materials layer inside a wider product, and the battery it protects stays intentionally simple: a stackable cabinet whose enclosure can receive the protection. The 10 kWh all-in-one stackable battery is the small-format example — 10.24 kWh from two 51.2 V / 5.12 kWh LiFePO4 modules, with the inverter in the tower.

The same platform reaches 20.48 كيلوواط/ساعة, with a وحدة 5.12 كيلوواط ساعة و 15 kWh floor-standing option between them. Product details stay brief here; the point is that a coated enclosure is being applied from home storage upward.
How to Evaluate a Fire-Coating Claim Before Ordering
Evaluate a fire-coating claim by matching the document to the exact product, protocol and jurisdiction, rather than reading a single headline number.
- Confirm who holds the report. Developer-group reports support the material; they are not the buyer’s own product certificate.
- Check the substrate and thickness. The cited fire test used a 2.5 mm coated steel plate, not a finished battery cabinet.
- Read the criterion, not only the result: back-face temperature under 300 °C and no burn-through under the stated flame and duration.
- Ask for system-level fire evidence required in the destination market; in the US, NFPA 855 (2026) references UL 9540A, whose Edition 6 was published on 13 March 2026.
- Request the current safety data sheet and RoHS declaration for the exact coating batch.
الأسئلة المتداولة
هل huadaenergy هي الأولى في استخدام هذا الطلاء المقاوم للحريق في تخزين الطاقة؟
تصف نفسها huadaenergy بأنها رائدة وأول من يطبق هذا الطلاء المطوّر حديثًا في صناعة التخزين. وقد طُوِّر الطلاء نفسه بالاشتراك مع شركات مواد تابعة، لذا فإن الادعاء يتعلق بالتطبيق وليس بملكية براءات اختراع المادة.
ما درجة الحرارة التي تحمّلها الطلاء في الاختبار؟
In report YJ2025060240, a 2.5 mm coated steel plate faced an 800–850 °C flame for 30 minutes without burn-through; its back face peaked at 154.8 °C against a 300 °C criterion. The result applies to that sample and protocol only.
هل يحل الطلاء المقاوم للحريق محل اختبار UL 9540A؟
لا. الطلاء طبقة حماية سلبية؛ بينما تقيّم UL 9540A والمعايير المماثلة سلوك الحريق والانتشار في نظام البطارية. كلاهما ينتمي إلى مراجعة التصميم، وتعتمد المتطلبات على السلطة المحلية.
هل الطلاء متوافق مع قواعد المواد الكيميائية في الاتحاد الأوروبي؟
خلص تقرير RoHS A2260349272101001C إلى أن العينة المختبرة متوافقة مع توجيه الاتحاد الأوروبي RoHS 2011/65/EU و(EU) 2015/863. وقد تم إعداد صحيفة بيانات السلامة SDS XG26165519 وفقاً للائحة الاتحاد الأوروبي REACH 2020/878. يجب الحصول على الوثائق السارية للدفعة المسلَّمة.
هل يمكن استخدام الطلاء خارج نطاق تخزين الطاقة؟
Yes. The developer’s brochure lists high-temperature industrial equipment, building steel structures, EV battery enclosures and electric transport among its application fields, with a variant for magnesium-alloy automotive parts.
ما هي منتجات huadaenergy التي يمكنها حمل الطلاء؟
The stackable platform from 5.12 to 20.48 kWh is the starting point, including the 10 kWh tower. Ask which enclosure and coating specification apply to a quoted configuration.
عن huadaenergy
huadaenergy builds LiFePO4 storage from small stacks to home towers and industrial systems, and works with affiliated materials partners on fire protection for storage equipment. The company assembles, configures and full-function tests each unit before packing. To request the coating documents, a datasheet or a quotation, use the huadaenergy contact page.
Last updated: 2026-11-18



