The Huada portable DC LiFePO4 battery pack is a 12.8V / 150Ah / 1920Wh lithium iron phosphate power source in an engineering PP carry case, built for telecom service, outdoor inspection, field operations and temporary DC loads where a fixed supply is not available.
Nominal Voltage
12.8V
4S1P EVE LF150 LiFePO4 cells, 10–14.6V DC operating range.
Nominal Capacity
150Ah
Lithium iron phosphate chemistry in a portable carry-case format.
Energy Capacity
1920Wh
Stored energy for dispersed worksites and temporary DC loads.
Total Mass
≤15.5kg
385 × 295 × 170 mm engineering PP enclosure with carry handle.
Overview
The Huada 12.8V 150Ah portable DC LiFePO4 battery pack delivers 1920Wh of stored energy in a rugged, hand-carry case. It is built for dispersed worksites and temporary DC loads: telecom service, outdoor inspection and field operations where a fixed power source is not available. Two independently fused DC outputs, an LCD status display, Bluetooth monitoring and a built-in BMS keep the pack easy to deploy and easy to check in the field. This portable DC LiFePO4 battery pack uses lithium iron phosphate chemistry; browse our portable power station range for other configurations.
12.8V / 150Ah from four EVE LF150 cells in a 4S1P configuration, ready for compatible DC equipment on site.
Power for every field assignment
Two outputs rated 20A each via LP20-4P connectors, each with its own branch fuse, for 40A total standard discharge.
Separate protection per branch
An LCD display shows state of charge, voltage, current and temperature; Bluetooth is fitted as standard for app-based monitoring.
LCD display / Bluetooth standard
Protection against overcharge, over-discharge, overcurrent, short circuit and temperature faults is integrated in the pack.
Monitored continuously in use
Engineering PP enclosure with a folding carry handle, lid latches and corner protection; total pack mass ≤15.5 kg.
385 × 295 × 170 mm
Discharge from −10 °C to +65 °C and charge from 0 °C to +60 °C, with storage from −5 °C to +50 °C.
Keep dry and avoid immersion
Telecom tower site scene is illustrative · display readings are illustrative · verify voltage, connector and load compatibility before use.
Inside the Pack
The pack is assembled from EVE LF150 lithium iron phosphate cells in a 4S1P configuration and managed by an integrated BMS. Status is available locally on the LCD display and, as standard, over Bluetooth through a compatible app.
Four lithium iron phosphate cells give a 12.8V nominal platform, 150Ah nominal capacity and 1920Wh of stored energy across a 10–14.6V DC operating range.
Built-in protection covers overcharge, over-discharge, overcurrent, short circuit and temperature, so the pack can be monitored and protected in field use.
The front LCD reports state of charge, voltage, current and temperature. Bluetooth is standard, letting a compatible app show key operating data. App functions depend on the supplied BMS and software.
A black engineering PP enclosure with a folding handle, lid latches, corner bumpers and a recessed connector panel, sized 385 × 295 × 170 mm at ≤15.5 kg.
DC Interfaces
Two DC output branches are each rated at 20A with their own fuse, giving 40A total standard discharge across both outputs. A separate DC charge input and optional project communication complete the interface set.
Two independently fused output branches on LP20-4P connectors, 20A per branch. The 40A figure is the total standard discharge current across both outputs.
A dedicated LP20-3P connector for charging. Standard and maximum charge current are both 20A; use a compatible lithium-battery charger.
RS485 / CAN communication can be configured for project-specific needs. The communication interface depends on the supplied configuration.
Confirm voltage, connector and current compatibility before connecting a load. Refer to the supplied configuration and technical documentation for the exact connector assignment.
Applications
1920Wh of stored energy for dispersed worksites and temporary DC loads. Runtime depends on the connected load: estimate 1920Wh × usable-energy factor ÷ load power (W).
Power compatible communications terminals and test equipment during installation, commissioning and maintenance work.
Move between inspection locations with a carry-case format instead of a fixed installation or a generator.
Support compatible DC loads during short-term field operations where mains power is unavailable.
Application scenes are illustrative · verify voltage, connector and load compatibility before use.
Specifications
All values below are taken from the supplied Huada New Energy product documentation for this model. Confirm connector and voltage compatibility, and refer to the supplied configuration and technical documentation before integration.
| Item | Specification |
|---|---|
| Cell & Electrical | |
| Battery Chemistry | Lithium iron phosphate (LiFePO4) |
| Cells / Configuration | EVE LF150 / 4S1P |
| Nominal Voltage / Capacity | 12.8V / 150Ah |
| Energy Capacity | 1920Wh |
| Operating Voltage | 10–14.6V DC |
| Charging & Discharging | |
| Standard / Max. Charge Current | 20A / 20A |
| Standard Discharge Current | 40A total (20A × 2) |
| DC Outputs | 2 × 20A, LP20-4P connectors, independent branch fuses |
| DC Charge Input | LP20-3P connector |
| Monitoring & Communication | |
| Monitoring | LCD display (state of charge, voltage, current, temperature) / Bluetooth standard |
| BMS Protection | Overcharge, over-discharge, overcurrent, short circuit, temperature |
| Optional Communication | RS485 / CAN (depends on configuration) |
| Operating Conditions | |
| Charge Temperature | 0 °C to +60 °C |
| Discharge Temperature | −10 °C to +65 °C |
| Storage Temperature | −5 °C to +50 °C |
| Structure | |
| External Dimensions | 385 × 295 × 170 mm |
| Total Mass | ≤15.5 kg |
| Enclosure / Color | Engineering PP / Black |
| Handling | Carry handle and latches for field transport |
Enclosure & Handling
An engineering PP enclosure, folding carry handle and lid latches make the pack practical to move between sites. A few simple handling rules keep it ready for the next assignment.
Black engineering PP case with corner protection, sized 385 × 295 × 170 mm and weighing ≤15.5 kg in total.
A folding carry handle and twin lid latches are built into the case for repeated field transport between inspection locations.
Operate within the specified temperature limits, keep dry and avoid immersion. Store at approximately 50% SOC and perform charge / discharge maintenance every 3 months.
FAQ
Answers based on the supplied product documentation for this 12.8V 150Ah portable DC pack.
Get a Quote
Tell us your application, required configuration and quantity, and we will come back with the current configuration sheet, technical documentation and commercial details for this portable DC LiFePO4 battery pack.
Who We Are
Huada Energy (Huizhou Huada Technology Co., Ltd.) is a professional energy storage manufacturer with a complete product portfolio — portable power stations, household energy storage systems and commercial & industrial (C&I) solutions. Starting from lead-acid battery production, we have grown into an advanced lithium technology manufacturer.
We are backed by multiple invention patents, utility model patents, design patents and High-Tech Enterprise certification. With a professional R&D team, modern production facilities and a global energy monitoring data center, we provide reliable OEM/ODM services for customers worldwide.
Advanced lithium battery manufacturer, upgraded from lead-acid production.
Reliable OEM/ODM services for customers worldwide.
Global energy monitoring data center for after-sales support.
High-Tech Enterprise certification with a full patent portfolio.
